ZhuHai Max Faith Automation equipment Co.,Ltd.
Add to Cart
LRW-15HP type CNC wire winding machine (11kW, 15HP)
LRW-15HP type CNC wire winding machine is mainly used for all kinds of transformers, inductors, reactor coil winding, it can be a round wire winding, wire winding, flat line vertical winding. Winding bare flat copper wire, wire enameled copper wire, paper, paper covered wire enameled copper wire, round wire etc.. This machine adopts digital control technology, has Chinese characters display terminal, with man-machine conversation function. A full set of equipment has the advantages of compact structure, reasonable layout, convenient operation, is the ideal vertical winding equipment. This equipment can be 10 strands together around the.
The characteristics of the product:
1>The machine mainly is a bed, a sliding frame, the top of the tail, the electrical control components; the machine and accessories tension line frame work. (tension wire frame according to the line package selection).
2>The main drive system is installed, the main drive for variable frequency motor, wide speed range, small vibration, low noise, low speed when the motor output torque is invariable, good performance of speed adjustment, stepless speed regulation, obvious energy saving effect of green environmental protection. The top of the tail is pneumatic, to balance the stress.
3>The sliding frame is provided with a cable system, the axial feed system consists of linear guide and wire rod, driven by a servo motor, axial movement is smooth, precise displacement, high precision of cable; cable lead (coil spacing can be set per turn).
4>Flat tyre, Pressure line on the winding axial moving, line pressing wheel is composed of a cylinder in the radial press winding mandrel, according to the section of the winding line of the reasonable allocation of line pressing roller and pressing pressure, can rotate around different width to thickness ratio and section line.
5>The automatic control system, 7 inch color touch screen, PLC, encoder, parameter setting, good man-machine interface, simple operation; suitable for multi batch, multi variety and flexible production. Can be set in the winding process of a tap.
Main technical parameters:
The maximum spindle speed:22 rpm
The maximum rotating diameter:1500 mm
The maximum workpiece and the core length:1500mm
The maximum length of the coil:1100 mm
The maximum diameter of the coil:1100 mm
Cable lead (pitch) to:100 mm
The maximum wiRE section square :1000 mm^2
The maximum width to thickness ratio:≤6
The spiral direction: left/right
Chuck type (optional):three jaw chuck 630 mm
Four jaw chuck 550*650 mm
Power consumption is lower than:12.2Kw
USED
Equipment configuration example
Technical specification: